Andor’s iStar 312T intensified CCD camera series is designed for rapid, ns-scale time-resolved Imaging. The 512 x 512 array is ideally suited for PLIF-based combustion analysis as well as Plasma plume analysis with ns time-resolution.
Andor's iStar DH312T intensified CCD camera series is designed for rapid, ns-scale time-resolved Imaging. The 512 x 512 array is ideally suited for PLIF-based combustion analysis as well as Plasma plume analysis with ns time-resolution.
It offers Multi-MHz readout for acquisition in excess of 15 frames per second, along with laptop-friendly, USB 2.0 connectivity and a fully integrated, software-controlled Digital Delay Generator (DDG™). This allows seamless integration of complex experiments at the touch of a button, with full timing and gain control through a single interactive interface. Gen 2 & 3 image intensifiers with entrance input window and phosphor options are available to match wavelength range requirements from 120 nm to 1,100 nm .
High-resolution sensors and image intensifiers - Sharpest images and spectrum definition, 100% fill factor for maximum signal collection efficiency.
True optical gating < 2 ns - Billionth of a second time-resolution for accurate transient phenomena study
5 MHz readout platform - Rapid frame and spectral rates for superior characterization of dynamic phenomena. Single readout amplifier for best image digitization uniformity.
Superfast readout options Crop & Fast Kinetic mode - Fully customizable binning sequences for highest spectral and image rates. Greater than 6,667 spectra/s continuous rates, up to 55,250 spectra/s in burst mode.
High QE Gen 2 & 3 image intensifiers - Superior photon capture, with peak QE up to 50% and spectral coverage from 120 to 1,100 nm.
Low jitter, on-board Digital Delay Generator (DDG™) - Highest gating timing accuracy with lowest propagation delay. Software controlled 3x triggering outputs with 10 ps setup accuracy for complex experiment integration.
500 kHz sustained photocathode gating - Maximizes signal-to-noise ratio in high repetition rate laser-based applications.
TE-cooling to -40ºC - Efficient minimization of CCD dark current and pixel blemishes
Photocathode EBI minimization - Dry gas purge interface for further efficient EBI reduction.
Intelligate™ - Intelligent and accurate MCP gating for better than 1:108 shuttering efficiency in the UV.
LM-C - C-mount lens adaptor
LM-NIKON-F - F-mount lens adaptor
OL-AF10-F45-#UV - UV-VIS 105mm SLR lens, 250 - 650 nm transmission, F-mount
ACC-XW-CHIL-160 - Oasis 160 Ultra compact chiller unit
ACC-6MM-TUBING-2xxxxM - 6 mm tubing option for ACC-XW-CHIL-160
ELC-05323 - i2c to BNC cable for Shamrock shutter control
ACC-ISTAR-METRIC ADP - Metric Bracket